Configuration control (option handling)
7.1 Configuration control
Distributed I/O system
System Manual, 02/2018, A5E31861578-AF
53
To set up the configuration control, follow these steps in the order given:
Enable configuration control in STEP 7
Section Configuring (Page 54)
2 Create control data record Section Creating the control data record
3 Transfer control data record Section Transferring the control data
record in the user program of the CPU
Block library "OH_S71x00_Library"
The block library OH_S71x00_Library
(https://support.industry.siemens.com/cs/ww/en/view/29430270
) is available for download
from the Internet. The block library contains data types with the structure of the control data
records for the ET200AL distributed I/O system. You can implement your flexible automation
solution economically with the help of these data types.
To Next Page
Loading...
