Siemens SIMATIC ET 200AL - Page 622

Setting and determining system diagnostics
4.2 Options for displaying system diagnostics
Diagnostics
Function Manual, 09/2016, A5E03735838-AD
37
4.2.2.4
Online & diagnostics
Online mode
In online mode there is an online connection between your PG/PC and one or several
devices. Depending on the properties of a device, you are offered specific diagnostics
options and certain functions in online mode.
● Diagnostics
– General module information
– Diagnostics status
– Cycle time
– Memory
– Diagnostics buffer
– Display
– Interface information (e.g. IP parameter, port information)
● Functions
– Assign IP address
– Set time and date of the CPU
– Firmware update (e.g. for PLC, display)
– Assign device name
– Reset to factory settings
– Format memory card
– Save service data