Setting and determining system diagnostics
4.2 Options for displaying system diagnostics
Diagnostics
58 Function Manual, 09/2016, A5E03735838-AD
"Trace" diagnostic options
You can read, view and save the trace recordings via the Web server and thus obtain plant
and project information for diagnostics and maintenance.
The web page of the trace and logic analyzer function consists of several areas. The
example in the figure below shows how the Web server user interface is divided when the
"Trace" web page is first called.
Figure 4-26 Web server, "Trace" home page (without measurement)
Additional information on the topic is available in the Web server function manual
(http://support.automation.siemens.com/WW/view/en/59193560
).
You can find additional information on the trace function in the Using the trace and logic
analyzer function (https://support.industry.siemens.com/cs/ww/en/view/64897128
) function
manual.
To Next Page
Loading...
