Setting and determining system diagnostics
4.2 Options for displaying system diagnostics
Diagnostics
64 Function Manual, 09/2016, A5E03735838-AD
The matrix view is only available for distributed I/O systems. The matrix view shows the
status of the devices of the PROFIBUS/PROFINET subnet.
● In PROFIBUS, the numbers assigned by PROFIBUS are used for identification (DP
station number).
● In PROFINET, the IO devices are numbered consecutively from 1.
Figure 4-31 Matrix view
Opens the lower-level devices or the detail view if there are no lower-
level devices.
Opens the higher-level device or the device view if there is no higher-
level device.
Opens the device view.
To Next Page
Loading...
