Siemens SIMATIC ET 200AL - Page 663

Alarms
6.2 Editing alarms in the alarm editor
Diagnostics
78 Function Manual, 09/2016, A5E03735838-AD
6.2
Editing alarms in the alarm editor
Introduction
You can edit the created alarms in STEP 7 either in the program editor or in the alarm editor.
You can find additional information on editing alarms in the program editor in the STEP 7
online help under "Creating and editing alarms".
Editing alarms in the alarm editor
You can edit alarm texts in the alarm editor and specify attributes such as alarm class or
priority for the alarms.
1. Double-click "PLC supervisions & alarms" in the project tree. Select the "Alarms" tab. The
alarm editor opens.
2. Enter the required texts and attributes in the appropriate columns.