PG communication
Communication
62 Function Manual, 12/2017, A5E03735815-AF
3. In the "Go online" dialog, make the following settings for your online connection:
– Select interface type (e.g. PN/IE) in the "Type of PG/PC interface" drop-down list.
– In the "PG/PC interface" drop-down list, select the PG/PC interface (e.g. Ind. Ethernet
card) you want to use to establish the online connection.
– Select the interface or the S7 subnet with which the PG/PC is physically connected
from the "Connection to interface/subnet" drop-down list.
– If the communication-capable module can be reached via an S7 router (gateway),
select the S7 router that connects the subnets in question from the "1st Gateway"
drop-down .
Figure 4-1 Setting up PG communication
To Next Page
Loading...
