Siemens SIMATIC ET 200AL - Dimension Drawing; Module Dimensions and Views

Distributed I/O system
84 System Manual, 02/2018, A5E31861578-AF
Technical specifications
10
Introduction
The technical specifications of the system are found in this section:
● The standards and test values that the ET 200AL distributed I/O system complies with
and fulfills.
● The test criteria according to which the ET 200AL distributed I/O system was tested.
Technical specifications for the modules
The technical data of the individual modules can be found in the modules' manuals. If there
are discrepancies between the statements in this document and the product manuals, the
statements in the product manuals take priority.
Reference
The certificates for the markings and approvals can be found on the Internet
(https://support.industry.siemens.com
).