Technical specifications
10.1 Standards and authorizations
Distributed I/O system
86 System Manual, 02/2018, A5E31861578-AF
Korea Certificate KCC-REM-S49-ET200
Please note that this device corresponds to limit class A with regard to the emission of radio
interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU)
The ET 200AL distributed I/O system meets the requirements and criteria of standard IEC
61131-2, excluding the requirements mentioned in section 11 to 14 (programmable logic
controllers, part 2: Equipment requirements and tests).
The ET 200AL distributed I/O system fulfills the requirements and criteria of standard IEC
61010-2-201.
The interface module IM 157-1 PN based on standard IEC 61158 Type 10.
The interface module IM 157-1 DP based on standard IEC 61158 Type 3.
Classification societies:
● ABS (American Bureau of Shipping)
● BV (Bureau Veritas)
● DNV-GL (Det Norske Veritas - Germanischer Lloyd)
● LRS (Lloyds Register of Shipping)
● Class NK (Nippon Kaiji Kyokai, being prepared)
The communication module CM 4xIO-Link 4xM12 based on standard IEC 61131-9.
To Next Page
Loading...
