Siemens SIMATIC ET 200AL - Page 881

OPC UA communication
9.3 Using the S7-1500 as an OPC UA server
Communication
Function Manual, 12/2017, A5E03735815-AF
195
Error codes
Table 9- 7 Error codes of the OPC foundation
Status "Good" (0000_0000 - 3FFF_FFFF)
Error code
(hex)
Name
Meaning
00000000
Good
Success, no error.
002D0000 GoodSubscriptionTrans-
ferred
The subscription was transferred to another session.
002E0000 GoodCompletesAsynchro-
nously
The processing will complete asynchronously.
002F0000
GoodOverload
Sampling has slowed down due to resource limitations.
00300000
GoodClamped
The value written was accepted but was clamped.
00960000
GoodLocalOverride
The value has been overridden.
00A20000
GoodEntryInserted
The data or event was successfully inserted into the historical database.
00A30000
GoodEntryReplaced
The data or event field was successfully replaced in the historical database.
00A50000
GoodNoData
No data exists for the requested time range or event filter.
00A60000
GoodMoreData
The data or event field was successfully replaced in the historical database.
00A70000
GoodCommunicationEvent
The communication layer has raised an event.
00A80000
GoodShutdownEvent
The system is shutting down.
00A90000
GoodCallAgain
The operation is not finished and needs to be called again.
00AA0000
GoodNonCriticalTimeout
A non-critical timeout occurred.
00BA0000 GoodResultsMayBeIncom-
plete
The server should have followed a reference to a node in a remote server
but did not. The result set may be incomplete.
00D90000 GoodDataIgnored The request pecifies fields which are not valid for the EventType or cannot
be saved by the historian.
00DC0000 GoodEdited The value does not come from the real source and has been edited by the
server.
00DD0000 GoodPostActionFailed There was an error in execution of these post-actions.
00E00000 GoodDependentValue-
Changed
A dependent value has been changed but the change has not been applied
to the device.