Safety-related shutdown of ET200AL standard modules
Distributed I/O system
System Manual, 02/2018, A5E31861578-AF
95
Figure A-1 Higher-level safety circuit with safety relay
Note
Usage of IO-Link devices
Please note that the IO
-Link device must have corresponding safety characteristics in order
-oriented tripping.
Requesting TÜV certificate (report no. SN89858T, Revision 1.1 of 10/11/2016)
You can request copies of the TÜV certificate and the accompanying report at the following
address:
Siemens AG
Digital Factory
DF FA AS SYS
P.O. Box 1963
D-92209 Amberg, Germany
You can find additional information as well as an overview of the modules with safety-related
shutdown on the Internet (https://support.industry.siemens.com/cs/us/en/view/39198632
).
To Next Page
Loading...
