Parameter assignment/addressing
3.1 Assigning an IO device to an IO controller
PROFINET with STEP 7 V15
46 Function Manual, 12/2017, A5E03444486-AH
You have assigned an IO device to an IO controller.
You can find an overview of the communication relationships in the "IO communication" tab
in the tabular area of the network view. This table is context-sensitive for selection in the
graphic area:
● Selection of the interface shows the I/O communication of the respective interface.
● Selection of the CPU shows all I/O communication of the CPU (including PROFIBUS).
● Selection of the station (as in the above figure) interface shows the I/O communication of
the complete station.
To Next Page
Loading...
