Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
60 Equipment Manual, 11/2023, A5E53268530-AA
Strain relief
7.1 Product overview
Article number
6ES7590-5DA00-0AA0 (VPE: 5 strain relief units incl. screws)
View
Figure 7-1 Strain relief
Properties
• The strain relief is a mechanical protective device for the electrical Industrial
Ethernet/PROFINET cables on the BusAdapter
• The strain relief is suitable for all electrical Industrial Ethernet/PROFINET cables of the
BusAdapter
• The strain relief is an optional accessory
• The cable ties are not included in the delivery. We recommend cable ties with a width of
4.8 mm. The maximum width is 7.0 mm. The length of the cable tie is min. 60 mm. When
mounting for smaller cable cross-sections, use a maximum width of 3.6 mm.
To Next Page
Loading...
Need help?
General
