Siemens simatic ET 200MP Equipment Manual

Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
Equipment Manual, 11/2023, A5E53268530-AA
63
Technical specifications
8
Technical specifications of the IM 155-5 MF HF
The following table shows the technical specifications as of 11/2023. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/de/pv/6ES7155-5AA00-0AC0/td?dl=en).
Article number
6ES7155-5MU00-0CN0
General information
Product type designation
IM 155-5 MF HF
HW functional status
From FS01
Firmware version
V5.0
• FW update possible
Yes
Vendor identification (VendorID)
002AH
Device identifier (DeviceID)
0312H
Product function
• I&M data
Yes; I&M0 to I&M3
• Module swapping during operation (hot
swapping)
Yes; In combination with active backplane bus
• Isochronous mode
No
• Tool changer
No
• Local coupling, IO data
No
Engineering with
• STEP 7 TIA Portal configurable/integrated from
version
V19
• STEP 7 configurable/integrated from version
use GSD file
• PROFINET from GSD version/GSD revision
GSDML V2.43
Configuration control
via dataset
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Short-circuit protection
Yes
Mains buffering
• Mains/voltage failure stored energy time
10 ms

Siemens simatic ET 200MP Specifications

General

Brand	Siemens
Model	simatic ET 200MP
Category	I/O Systems
Language	English