Siemens simatic ET 200MP Equipment Manual

Strain relief
7.2 Installing
Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
62 Equipment Manual, 11/2023, A5E53268530-AA
4. Screw the BusAdapter to the PROFINET device (1 screw with 0.25 Nm tightening torque).
5. Fasten each Industrial Ethernet/PROFINET cable individually to the strain relief with the cable
ties.
Figure 7-3 Strain relief installed

Siemens simatic ET 200MP Specifications

General

Brand	Siemens
Model	simatic ET 200MP
Category	I/O Systems
Language	English