Siemens simatic ET 200MP - Busadapter BA 2 Xfc V5.0 X; Busadapter BA 2 Xlc V5.0 X; Busadapter BA 2 Xm12 V5.0 X; Busadapter BA 2 Xrj45 V5.0 X

Technical specifications
Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
64 Equipment Manual, 11/2023, A5E53268530-AA
Article number
6ES7155-5MU00-0CN0
Input current
Current consumption (rated value)
0.16 A; at 24 V DC and without load
Current consumption, max.
1.2 A
Inrush current, max.
13 A
I²t
0.1 A²·s
Power
Infeed power to the backplane bus
16 W
Power available from the backplane bus
3.4 W; in case of operation with separate system
power supply to the left of IM
Power loss
Power loss, typ.
4.3 W
Address area
Address space per module
• Address space per module, max.
256 byte; For input and output data respectively
Address space per station
• Address space per station, max.
1 440 byte; For input and output data respectively
Hardware configuration
Integrated power supply
Yes; 16 W
System power supply can be plugged in to left of
IM
Yes; only with design with U-connectors
Number of permissible power segments
3; incl. interface module
Rack
• Modules per rack, max.
30; I/O modules
Submodules
• Number of submodules per station, max.
256; 9 per I/O module
Interfaces
Number of PROFINET interfaces
1; 2 ports (switch)
1. Interface
Interface types
• RJ 45 (Ethernet)
Yes; with BusAdapter
• Number of ports
2; with BusAdapter
• integrated switch
Yes
• BusAdapter (PROFINET)
Yes; BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA
SCRJ/RJ45, BA SCRJ/FC, BA 2x LC, BA LC/RJ45, BA
LC/FC
Protocols
• PROFINET IO Device
Yes
• Open IE communication
Yes
• Media redundancy
Yes; PROFINET MRP client / HRP client