Siemens simatic ET 200MP - Dimensional Drawing; Dimensional Drawing of the AI 8 xU;I;R;RTD BA Module

Parameter
5.3 Configuration control (option handling)
Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
42 Equipment Manual, 11/2023, A5E53268530-AA
5.3.4 Extending the configuration
Operating principle
You can add modules at the end of the configuration with this procedure. The configured
configuration can also be extended from the center based on freely selectable slot
assignment.
Figure 5-2 Extending the configuration