Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series User Manual

Preface
Analog input module F-AI 4xI 0(4)..20mA 2-/4-wire HF (6ES7136-6AA00-0CA1)
4 Manual, 08/2018, A5E41448857-AB
Recycling and disposal
For environmentally friendly recycling and disposal of your old equipment, contact a certified
electronic waste disposal company and dispose of the equipment according to the applicable
regulations in your country.
Important note for maintaining the operational safety of your system
WARNING
The operators of systems with safety-related characteristics must adhere to specific
operational safety requirements. The supplier is also obliged to comply with special product
monitoring measures. Siemens informs system operators in the form of personal
notifications about product developments and properties which may be or become
important issues in terms of operational safety.
You should subscribe to the corresponding notifications in order to obtain the latest
information and to allow you to make any necessary modifications to your system.
Log on to Industry Online Support. Follow the links below and click on "Email on update" on
the right-hand side in each case:
• SIMATIC S7-300/S7-300F
(https://support.industry.siemens.com/cs/products?pnid=13751&lc=en-WW)
• SIMATIC S7-400/S7-400H/S7-400F/FH
(https://support.industry.siemens.com/cs/products?pnid=13828&lc=en-WW)
• SIMATIC WinAC RTX (F) (https://support.industry.siemens.com/cs/ww/en/ps/13915)
• SIMATIC S7-1500/SIMATIC S7-1500F
(https://support.industry.siemens.com/cs/products?pnid=13716&lc=en-WW)
• SIMATIC S7-1200/SIMATIC S7-1200F
(https://support.industry.siemens.com/cs/products?pnid=13683&lc=en-WW)
• Distributed I/O (https://support.industry.siemens.com/cs/products?pnid=14029&lc=en-
WW)
• STEP 7 (TIA Portal)
(https://support.industry.siemens.com/cs/products?pnid=24471&lc=en-WW)

Siemens SIMATIC ET 200SP F-AI 4xI 0(4) 20mA 2-/4-wire HF Series Specifications

General

Input channels	4
Wiring type	2-/4-wire
Series	SIMATIC ET 200SP
Supply voltage	24 V DC
Rated value (DC)	24 V
Power loss, typ.	1.5 W
Interference voltage suppression for interference frequency f1 in Hz	50/60 Hz
Diagnostics function	Yes
Galvanic isolation	Yes
Potential separation channels	Yes
Potential separation between the channels and backplane bus	Yes
Module type	AI
Safety integrity level	SIL 3
Connection method	Push-in terminals
Operating voltage	24 V DC
Weight	200 g
Input current range	0(4)..20 mA
Product type designation	F-AI 4xI 0(4)..20mA 2-/4-wire HF
Analog value generation for the inputs	16 bits
Resolution	16 bit
Integration time/resolution per channel	Configurable