Test functions and troubleshooting
10.1 Test functions
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
Operating Instructions, 09/2016, A5E35873416-AA
107
Testing with watch tables
The following functions are available in the watch table:
● Monitoring of tags
You can use watch tables to monitor the current values of the individual tags of a user
program or CPU on the programming device or PC and on the Web server. So that the
Web server can display the value of the tag, you must specify a symbolic name for the
tag in the "Name" column of the watch table.
You can monitor the following operand areas:
– Inputs and outputs (process image) and bit memory
– Contents of data blocks
– Peripheral inputs and peripheral outputs
– Timers and counters
● Modifying tags
Use this function to assign fixed values to the individual tags of a user program or CPU
on the PG/PC. Modifying is also possible with Test with program status.
The following operand areas are modifiable:
– Inputs and outputs (process image) and bit memory
– Contents of data blocks
– Peripheral inputs and peripheral outputs (for example, %I0.0:P, %Q0.0:P)
– Timers and counters
● "Enable peripheral outputs" and "Modify now"
These two functions enable you to assign fixed values to individual peripheral outputs of
a CPU in the STOP mode. You can also use them to check your wiring.
To Next Page
Loading...
