Siemens Simatic ET200pro

CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
118 Operating Instructions, 09/2016, A5E35873416-AA
Technical specifications
12
12.1
Technical specifications
General technical specifications
The CPU 1516pro-2 PN also complies with the standards and test values applicable to the
ET 200pro distributed I/O system. You can find detailed information on the general technical
specifications in the ET 200pro Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/21210852
) operating instructions.
Technical specifications of the CPU 1516pro-2 PN
6ES7516-2PN00-0AB0
General information
Product type designation
CPU 1516pro-2 PN
Hardware function version
FS01
Firmware version
V2.0
Engineering with
STEP 7 TIA Portal configurable/integrated as of
version
V14
Configuration control
Via data record
No
Operator control elements
Mode switch
1
Supply voltage
Type of supply voltage
24 V DC
Valid range, low limit (DC)
20.4 V
Valid range, high limit (DC)
28.8 V
Reverse polarity protection
Yes
Power and voltage failure buffering
Power/voltage failure buffer time
5 ms
Input current
Current consumption (nominal value)
0.31 A
Inrush current, max.
0.4 A; nominal value
I²t
0.001 A²s
Power
Infeed power to the backplane bus
2.275 W
Power loss
Power loss, typ.
5.3 W