Siemens Simatic ET200pro

CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
4 Operating Instructions, 09/2016, A5E35873416-AA
Preface
Purpose of the operating instructions
This CPU 1516pro-2 PN operating instructions manual supplements the operating
instructions of the ET 200pro decentralized I/O system.
The information provided in this manual and the operating instructions of the ET 200pro
enables you to commission the CPU 1516pro-2 PN.
Basic knowledge required
General knowledge in the field of automation engineering is required to understand this
documentation.
Validity of the documentation
This documentation applies to the CPU 1516pro-2 PN of the ET 200pro distributed
I/O system.
Conventions
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of
the product or on the section of the documentation to which particular attention
should be paid.