Protection
6.4 Know-how protection
CPU 1516pro-2 PN (6ES7516-2PN00-0AB0)
64 Operating Instructions, 09/2016, A5E35873416-AA
Setting up block know-how protection
To set up block know-how protection, follow these steps:
1. Open the properties of the respective block.
2. Select the "Protection" option under "General".
Figure 6-2 Setting up block know-how protection (1)
3. Click the "Protection" button to display the "Know-how protection" dialog.
Figure 6-3 Setting up block know-how protection (2)
4. Click the "Define" button to open the "Define password" dialog.
Figure 6-4 Setting up block know-how protection (3)
5. Enter the new password in the "New password" field. Enter the same password in the
"Confirm password" field.
6. Click "OK" to confirm your entry.
7. Close the "Know-how protection" dialog by clicking "OK".
Result: The blocks selected will be know-how-protected. Know-how protected blocks are
marked with a lock symbol in the project tree. The password entered applies to all blocks
selected.
To Next Page
Loading...
