Siemens SIMATIC HMI KTP900 Basic User Manual

Technical Support
A.2 System events
Basic Panels 2nd Generation
120 Operating Instructions, 10/2016, A5E33293231-AB
A.2
System events
System events on the HMI device provide information about internal states of the HMI device
and the controller.
Note
System even
ts are only indicated if an alarm window was configured. System events are
output in the language currently set on your HMI device.
System event parameters
System events may contain encrypted parameters which are relevant to troubleshooting
because they provide a reference to the source code of the runtime software. These
parameters are output after the text "Error code:".
Description of the system events
A listing of all system alarms for your HMI device is provided in the online help of your
configuration software.

Siemens SIMATIC HMI KTP900 Basic Specifications

General

Display Size	9 inches
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Interface	PROFINET
Power Supply	24 V DC
Operating System	Windows CE
USB Port	1 x USB 2.0
Ambient Temperature (Operation)	0 to 50 °C
Ambient Temperature (Storage)	-20 to 60 °C
Relative Humidity	10% to 90% (non-condensing)
Protection Rating	IP65 (front)
Memory	12 MB
Communication Ports	Ethernet (RJ45)
Number of Colors	65536