Siemens SIMATIC HMI KTP900 Basic User Manual

Configuring the device
5.11 Activating the acoustic signal
Basic Panels 2nd Generation
58 Operating Instructions, 10/2016, A5E33293231-AB
5.11
Activating the acoustic signal
1.
Touch the "Sounds" icon.
2.
Set the "Sound" switch to "ON".
Once you have set "Sound" to
"ON", you receive acoustic
feedback when you touch the
touch screen in the active project.

Siemens SIMATIC HMI KTP900 Basic Specifications

General

Display Size	9 inches
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Interface	PROFINET
Power Supply	24 V DC
Operating System	Windows CE
USB Port	1 x USB 2.0
Ambient Temperature (Operation)	0 to 50 °C
Ambient Temperature (Storage)	-20 to 60 °C
Relative Humidity	10% to 90% (non-condensing)
Protection Rating	IP65 (front)
Memory	12 MB
Communication Ports	Ethernet (RJ45)
Number of Colors	65536