Siemens SIMATIC HMI KTP900 Basic User Manual

Configuring the device
5.20 Importing a certificate via USB
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
67
5.20
Importing a certificate via USB
The use of certificates increases the information security of web-based communication, e.g.
communication between a Sm@rtClient and the Sm@rtServer.
Requirement
● A Basic Panel with PROFINET interface and an HMI device image compatible with
WinCC (TIA Portal) V14 or higher.
● A USB memory device with a valid certificate is connected to the Basic Panel.
Procedure
1.
Touch the "Internet Settings" icon.
2.
Press the "Import Certificate"
button.
3.
Select the desired certificate.
4.
If the certificate is password-
protected, enter the password for
the certificate under "Password".
5.
Press the "Import" button.

Siemens SIMATIC HMI KTP900 Basic Specifications

General

Display Size	9 inches
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Interface	PROFINET
Power Supply	24 V DC
Operating System	Windows CE
USB Port	1 x USB 2.0
Ambient Temperature (Operation)	0 to 50 °C
Ambient Temperature (Storage)	-20 to 60 °C
Relative Humidity	10% to 90% (non-condensing)
Protection Rating	IP65 (front)
Memory	12 MB
Communication Ports	Ethernet (RJ45)
Number of Colors	65536