Siemens SIMATIC HMI KTP900 Basic User Manual

Mounting and connecting
3.3 Connecting the HMI device
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
31
3.3.4
Connecting a programming device
A programming device gives you the following options:
● Transfer a project
● Transfer an HIM device image
Connecting a programming device to a Basic Panel DP
1.
Shut down the HMI device.
2.
Connect an RS 485 PROFIBUS
connector to the HMI device.
3.
Connect an RS 485 PROFIBUS
connector to the programming
device.
3.3.5
Connecting the configuration PC
A configuration PC gives you the following options:
● Transfer a project
● Transfer an HIM device image
● Reset the HMI device to factory settings

Siemens SIMATIC HMI KTP900 Basic Specifications

General

Display Size	9 inches
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Interface	PROFINET
Power Supply	24 V DC
Operating System	Windows CE
USB Port	1 x USB 2.0
Ambient Temperature (Operation)	0 to 50 °C
Ambient Temperature (Storage)	-20 to 60 °C
Relative Humidity	10% to 90% (non-condensing)
Protection Rating	IP65 (front)
Memory	12 MB
Communication Ports	Ethernet (RJ45)
Number of Colors	65536