Siemens SIMATIC HMI KTP900 Basic - Enter Time and Date

Configuring the device
5.10 Enter time and date
Basic Panels 2nd Generation
Operating Instructions, 10/2016, A5E33293231-AB
57
5.10
Enter time and date
1.
Touch the "Date & Time" icon.
2.
Press the "Date & Time" button.
3.
If you are using a time server
(NTP=ON), set a time shift with
the selection wheel under
"Time shift", if required.
If you are not using a time server
(NTP=OFF), set the desired time
and the desired time shift with the
selection wheel.
The resulting local time is
displayed under "Localtime".