Siemens SIMATIC HMI KTP900 Basic User Manual

Mounting and connecting
3.5 Securing the cables
Basic Panels 2nd Generation
38 Operating Instructions, 10/2016, A5E33293231-AB
3.5
Securing the cables
NOTICE
Strain relief
Contacts can be broken or wires can be torn off if cables are not provided adequate strain
relief.
Provide adequate strain relief for all cables.
The following HMI devices come equipped with a fixing element on the back for strain relief:
● KTP900 Basic
● KTP1200 Basic
After the power-on test, use a cable tie to secure the connected cables to the marked fixing
element in order to provide strain relief.

Siemens SIMATIC HMI KTP900 Basic Specifications

General

Display Size	9 inches
Display Type	TFT
Resolution	800 x 480 pixels
Touchscreen	Yes
Interface	PROFINET
Power Supply	24 V DC
Operating System	Windows CE
USB Port	1 x USB 2.0
Ambient Temperature (Operation)	0 to 50 °C
Ambient Temperature (Storage)	-20 to 60 °C
Relative Humidity	10% to 90% (non-condensing)
Protection Rating	IP65 (front)
Memory	12 MB
Communication Ports	Ethernet (RJ45)
Number of Colors	65536