SIMATIC IPC127E
Operating Instructions, 01/2019, A5E44296915-AA
37
Commissioning the device and device functions
4.1 General information on commissioning
The surface of some devices can reach temperatures of over 70 °C. These
devices are identified with corresponding labels.
● Any unprotected contact may cause burns.
● Avoid direct contact with the device during operation.
● Touch the device only with appropriate protective gloves.
Requirement
● The device is connected to the power supply.
● The protective conductor is connected.
● The connection cables are plugged in correctly.
● The following hardware is available for initial commissioning:
– One USB keyboard
– One USB mouse
– A monitor/display
To Next Page
Loading...
