Mounting and connecting the device
3.1 Preparing for mounting
SIMATIC IPC127E
Operating Instructions, 01/2019, A5E44296915-AA
21
3.1.2 Identification data of the device
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the identification data in the following table:
You can find this information on the nameplate and COA label. The rating plate is located on
the back panel of the device. The COA label is only available in pre-installed Windows
operating systems and is affixed to the rear of the device.
Procedure
1. Transfer article number, serial number, production version (FS) and Ethernet addresses
from the nameplate.
The Ethernet addresses can also be found in the BIOS Setup under "Main > Advanced >
Peripheral Configuration" (see section "Technical Specifications").
Replacement device: The article number of a replacement device that can be briefly
loaned out from the warehouse is listed on the nameplate.
Note
Replacement device without storage media
If you order a replacement device, remove the SSD from your device and insert it into the
new device.
2. Transfer the Windows "Product Key" from the COA label.
To Next Page
Loading...
Need help?
General
