SIMATIC IPC127E
Operating Instructions, 01/2019, A5E44296915-AA
59
Certificates and approvals
7.1 CE marking
The device meets the guidelines listed in the following sections.
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
EC Declaration of Conformity, UL approval Canada/USA
(http://support.automation.siemens.com/WW/view/en/48958203).
7.2 DIN ISO 9001 certificate and software license agreements
DIN ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets the requirements of DIN ISO 9001:2000.
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate registration no. DE-000656 QM08
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
7.3 UL61010 approval
UL approval
The following approvals are available for the device when specified as such on the
nameplate:
● Underwriters Laboratories (UL) according to Standard UL 61010-2-201 Second Edition,
File E85972 (PROG.CNTLR.)
● Canadian National Standard CAN/CSA-C22.2 No. 61010-2-201 Second Edition
To Next Page
Loading...
Need help?
General
