Maintaining and repairing the device
7.4 Installing and removing hardware
SIMATIC IPC277G
64 Operating Instructions, 08/2021, A5E50059956-AA
Unplug the marked COM cables on the motherboard and
remove the interface plate of the device.
Unscrew the marked two spring screws with a T8
screwdriver on the motherboard.
Unscrew the marked two screws on the power module and
unscrew the marked other five screws with a T10
screwdriver on the motherboard.
Press the retaining clips outward in the direction of the
arrows to unlock the memory socket.
Pull out the memory module from the socket.
To Next Page
Loading...
