AS and OS expansions
7.2 Program changes
Compendium Part D - Operation and Maintenance (V9.0)
88 Operating Manual, 02/2018, A5E43228948-AA
Auto-archiving after successful download
As of PCS 7 version V8.1, the auto-archiving function is available in the "Download to target
system" dialog box. Archiving is performed automatically after downloading by setting the
"Archive project after successful download" option. The option can only be activated if a
version project was selected via the "Browse for Version Project..." button. Archiving is
performed automatically using Version Trail by activating the "Archive project after
successful download" option. Archiving is started once the "S7 Download" dialog box is
closed and the download is successfully completed. Version Trail is opened for this purpose.
Note
The "Archive project after successful download" option requires that the Version Trail options
package is installed on the ES.
The "Selective download" function can be used to download one or more modified CFCs or
SFCs. You can use selective downloading of individual charts to specifically select which
configured changes should be transferred to the target system and enabled. This makes it
possible, for example, to configure multiple units on a target system in parallel, because the
changes to a unit can be compiled, downloaded, and tested. Selective downloading is
possible under the following conditions:
● A complete download is required
● A complete compilation is required
● Status message for TCiR is displayed (a type adjustment has been initiated)
To Next Page
Loading...
