Siemens SIMATIC PCS 7 - Scenario 1 - Replacing a Device of the same Type and with a Later Version

Service and maintenance of SIMATIC PDM
6.6 Replacing/removing field devices
Compendium Part D - Operation and Maintenance (V9.0)
Operating Manual, 02/2018, A5E43228948-AA
63
6.6.1
Scenario 1 - Replacing a device of the same type and with a later version
HART device (PDM V9.1) procedure
In this example, the Siemens SIPART PS2 positioner version C1 is replaced with version
4.00.00. The device is configured with the name "Compend" in HW Config.