Transponder
7.7 SIMATIC RF610T ATEX
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
373
7.7 SIMATIC RF610T ATEX
7.7.1 Features
The SIMATIC RF610T special variant ATEX is passive and maintenance-free. It operates
based on the UHF Class 1 Gen 2 technology and is used for saving the electronic product
code (EPC) of 96 bits / 240 bits. The label also has a 512 bit user memory.
The SIMATIC RF610T special variant ATEX provides numerous possible uses for a wide
range of applications and allows efficient logistics throughout the entire process chain.
Thanks to its antenna geometry, the transponder can be read from any direction. However,
the range is reduced if it is not aligned in parallel with the antenna.
Area of application
• Simple identification, such as barcode re-
placement or barcode supplement
• Warehouse and distribution logistics
• Product identification
For the Food & Beverage sector, a special ver-
sion can be supplied on request that is certified
for use in contact with food.
Air interface According to ISO 18000-63
Memory
• EPC: 96 ... 240 bits
• User memory: 64 bytes
Read range Max. 5 m
1)
Mounting
• Suspended by means of cable ties, or simi-
lar
• Can also be fixed with screws or glued by
customer.
• Not suitable for mounting straight onto met-
al.
1)
Depending on the environment, the reader/the antennas and the set power
7.7.2 Ordering data
Table 7- 21 Ordering data RF610T ATEX
To Next Page
Loading...
