Transponder
7.12 SIMATIC RF640T
SIMATIC RF600
420 System Manual, 11/2018, J31069-D0171-U001-A21-7618
7.12.6 Certificates and approvals
Table 7- 49 6GT2810-2DC00 - RF640T
Conformity with the RED directive 2014/53/EU
Conformity with the RoHS directive 2011/65/EU
Conformity with the ATEX directive 2014/34/EU
Table 7- 50 6GT2810-2DC10 - RF640T
Federal Communications
Passive labels or transponders comply with the valid regulations;
certification is not required.
This product is UL-certified for the USA and Canada.
It meets the following safety standard(s):
UL 60950-1 - Information Technology Equipment Safety - Part 1:
General Requirements
CSA C22.2 No. 60950 -1 - Safety of Information Technology Equip-
ment
ATEX certification
The type test certification for the RF640T is stored by TÃœV 07 ATEX 346241 / Version 1. On
the basis of this certification, the CE declaration by the manufacturer has been made
according to directive 94/9/EC.
The producing factory of the RF640T has an ATEX quality assurance system recognized by
the DEKRA EXAM GmbH with notice number BVS 11 ATEX ZQS/E111.
Manufacturer's address - distributor
Manufacturer's address - factory
Siemens Aktiengesellschaft (PD PA CI)
Process Industries and Drives Division
Industrial Communication and Identification
-76181 Karlsruhe, Germany
Siemens Aktiengesellschaft (DF FA CE)
mation
Control Components and System Engineering
Breslauer Straße 5
To Next Page
Loading...
Need help?
General
