Transponder
7.12 SIMATIC RF640T
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
407
7.12 SIMATIC RF640T
7.12.1 Characteristics
SIMATIC RF640T transponder is a passive (i.e. battery-free) and maintenance-free, round-
shaped data carrier. It operates based on UHF Class 1 Gen 2 technology and is used to
save the "Electronic Product Code" (EPC) of 96 bits/240 bits. The transponder also has a
512-bit user memory.
The areas of application are industrial asset management, RF identification of tools,
containers and metallic equipment.
The tool tag is small and rugged and suitable for industrial applications with degree of
protection IP68. It is highly resistant to oil, grease and cleaning agents.
SIMATIC RF640T should preferably be mounted directly on a flat metal surface of at least
150 mm in diameter.
Area of application
Identification tasks in rugged industrial envi-
ronments Suitable for use in hazardous are-
Frequency range
• ETSI: 865 to 868 MHz
• FCC: 902 to 928 MHz
According to ISO 18000-63
Polarization Linear
Memory
• EPC: 96 ... 240 bits
• User memory: 64 bytes
1)
Mounting Designed for direct mounting on conductive
materials (preferably metal).
1)
Depending on the environment, the reader/the antennas and the set power
7.12.2 Ordering data
Table 7- 45 RF640T ordering data
To Next Page
Loading...
Need help?
General
