Siemens Simatic S7-300 CP 341 - Configuring and Parameter Assignment the CP 341; Parameter Assignment Options; Table 5- 1 Configuration Options for the CP 341

CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Manual, 09/2008, A5E02191071-01 115
Configuring and Parameter Assignment the CP 341
5
5.1 Parameter Assignment Options
Configuration options
You configure and assign the module variants of the CP 341 using STEP 7 or the CP 341:
Point-to-Point Communication, Parameter Assignment parameter assignment interface.
Table 5- 1 Configuration options for the CP 341
Product Order number Assignable using the parameter
assignment interface
Under STEP 7
CP 341-RS 232C 6ES7341-1AH02-0AE0
CP 341-20mA-TTY 6ES7341-1BH02-0AE0
CP 341-RS 422/485 6ES7341-1CH02-0AE0
As of V5.0 as of version V5.3
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
长沙工控帮教育科技有限公司
www.gkbpx.com