CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Manual, 09/2008, A5E02191071-01 17
Product Description
1
1.1 Possible applications for the CP 341
The CP 341 communication processor enables you to exchange data between automation
devices or computers by means of a point-to-point connection.
Functionality of the CP 341
The CP 341 communication processor provides the following functionality:
● Transmission rate up to 115.2 kbaud, half duplex
● Integration of the most important transmission protocols in the module firmware:
– 3964(R) procedure
– RK 512 computer link
– ASCII driver
– Printer driver
● Subsequent loading of other drivers (transmission protocols) with the CP 341: Point-to-
Point Communication, Parameter Assignment parameter assignment interface.
● Adaptation of the transmission protocols using the CP 341: Point-to-Point
Communication, Parameter Assignment parameter assignment interface
● Integrated serial interface:
Three module variants are available, each having a different interface type that is suitable
for different communication partners (see following table).
Module variants
The following variants of the CP 341 communication processor are available:
Table 1- 1 CP 341 module variants
Module Order number Integrated interface
CP 341-RS 232C 6ES7341-1AH02-0AE0 RS 232C interface
CP 341-20mA-TTY 6ES7341-1BH02-0AE0 20mA-TTY interface
CP 341-RS 422/485 6ES7341-1CH02-0AE0 X27 (RS 422/485) interface
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
