Communication via Function Blocks
6.5 Using the System Function Blocks with the ASCII Driver
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
164 Manual, 09/2008, A5E02191071-01
FC 6 V24_SET parameters
The following table lists the parameters of the FC 6 V24_SET.
Table 6- 12 FC 6 V24_SET parameters
Name Sort Data type Comment Permitted values, remark
LADDR INPUT INT CP 341 start address The start address is taken from
STEP 7.
RTS INPUT BOOL Request to send,
CP 341 ready to send
(Control CP 341 output)
DTR INPUT BOOL Data terminal ready,
CP 341 ready for operation
(Control CP 341 output)
See also
Principle of the Data Transmission with the ASCII Driver (Page 62)
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
