Programming Example for Standard Function Blocks
9.2 Device Configuration
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
206 Manual, 09/2008, A5E02191071-01
9.2 Device Configuration
Application
To try out the program example, you could use the following devices:
● An S7-300 automation system (rack, power supply, CPU)
● A CP 341 module with a communications partner (e.g., a second CP), or insertion of a
"short-circuit connector", i.e. the send line is bridged to the receive line
The use of the "short-circuit connector" is only supported by the ASCII protocols.
● A programming device.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
