Configuring and Parameter Assignment the CP 341
5.8 Firmware updates
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
126 Manual, 09/2008, A5E02191071-01
5.8.2 Viewing the Firmware Version
Viewing the hardware and firmware version
You can view the current hardware and firmware version on the CP 341 in STEP 7 in the
"Module Information" dialog. Access this dialog box as follows:
● In SIMATIC Manager: File > Open > Project > Open HW Config > Station > Open Online
and double-click the CP 341 module.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
To Next Page
Loading...
