Siemens SIMATIC S7-300 Module data Product Information

Basic functions
4.1 Encoder settings
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
101
Enter the encoder-specific data, such as the number of encoder pulses, the number of
data bits and the multiplication factors.
Note
If the value zero has been set for the multiplication factors, the factory settings
(11-bit for Gn_XIST_1 and 9-bit for Gn_XIST_2) will be used.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)