Siemens SIMATIC S7-300 Module data Product Information

Commissioning
3.3 Preparing the connection to the SINAMICS
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
23
3.3 Preparing the connection to the SINAMICS
3.3.1 Overview
Introduction
To establish a connection for the configuring of the SINAMICS S120 between the
programming device and the drive system, several preliminary tasks must be performed;
these tasks are discussed in detail in the following sections.
3.3.2 Creating a STEP 7 project
Procedure
To create a new project, start the SIMATIC Manager and use the File > New menu
command to create a new project, for example, a project with the name DSC_SINAMICS.
Then use the Insert > Station > SIMATIC 300 station menu command to add a new
S7 300 station.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)