Siemens SIMATIC S7-300 Module data Product Information

Commissioning
3.6 Creating technology objects
Connection of the SINAMICS S120 to the Technology CPU
Product Information, 09/2011, A5E00480378-04
85
3.6.2 Technology Objects Management (TOM)
Procedure
1. Double-click the "Technology objects" entry in the "Technology" folder of the SIMATIC
station to open the Technology Objects Management (TOM) in the SIMATIC Manager.
2. The list of the technology data blocks that have not yet been created contains the
technology objects that have been previously configured in S7T Config or are available
as standard but for which no technology data blocks have been created previously.
If necessary, change the suggested DB numbers of the technology objects in the first
column of the list and click the "Create" button to create the technology data blocks.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)