Siemens SIMATIC S7-300 Module data Product Information

SINAMICS S120 automation components
2.6 Determining the firmware version number
Connection of the SINAMICS S120 to the Technology CPU
12 Product Information, 09/2011, A5E00480378-04
Determining the firmware version of the SINAMICS S120 in S7T Config
If a current configuration of the SINAMICS S120 is available in S7T Config,
the firmware of the SINAMICS S120 can be determined as follows.
Select in the project navigator for S7T Config the appropriate SINAMICS S120.
Double-click "Overview".
Open the Version overview tab. Take the firmware version of the SINAMICS S120
from this table.
Note
Ensure that your configuration is consistent in S7T Config online. This is necessary to
ensure that the firmware versions shown here can be loaded online.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)