6-1
S7-400 and M7-400 Programmable Controllers, Installation Manual
C79000-G7076-C424-01
Starting Up
Chapter Overview
Section Description Page
6.1 Recommended Procedure for First Startup 6-2
6.2 Checks Prior to Switching On for the First Time 6-3
6.3 Connecting a Programming Device (PG) to an S7-400 6-5
6.4 Switching On an S7-400 for the First Time 6-6
6.5 Resetting the CPU with the Mode Selector Switch 6-7
6.6 Cold, Warm, and Hot Restarts with the Mode Selector Switch 6-10
6.7 Inserting a Memory Card 6-11
6.8 Inserting a Backup Battery (Option) 6-13
6.9 Starting Up a PROFIBUS-DP Subnet 6-17
6.10 Installing Memory Submodules in the CPU 6-19
6.11 Installing Interface Submodules (CPU 417 and 417 H) 6-21
6
www.PLCworld.cn
To Next Page
Loading...
