9.6.5 "CP440 SLAVE" Program Example
In FB 40, RECV is called to query whether a job has been received from the master. For this
purpose, in the receive message frame the slave address is compared with its own address. As
soon as there is a job, the reply is sent to the master with the SEND call.
The parameters can be adapted for other slaves in OB 1.
Programming Example for Standard Function Blocks
9.6 Activation, Startup Program and Cyclic Program
Point-to-point connection CP 440 Installation and Parameter Assignment
Equipment Manual, 03/2022, A5E00057742-AE 115
To Next Page
Loading...
