The coupling modules CP 440 for point-to-point connections are tested according to the
requirements of EN 61131-2, which fall under the Low Voltage Directive.
EMC Directive
2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
Use in industry
SIMATIC products are designed for industrial applications.
Area of applica‐
tion
Interference requirements Immunity requirements
Industry EN 61000-6-4 + A1 EN 61000-6-2
Adhere to the installation guidelines
SIMATIC products meet the requirements if you comply with the installation guidelines
described in the manuals during installation and operation.
10.2.3 CCC approval
Certicate:
2020322309002744
Ex nA IIC T4 Gc
According to the following standards:
• GB 3836.1-2010 (Explosive atmospheres - Part 1: Equipment - General requirements)
• GB 3836.8-2014 (Explosive atmospheres-Part 8: Equipment protection by type of protection
"n")
10.2.4 UKCA approval
DEKRA 21UKEX0018 X
Importer UK:
Siemens plc
Manchester M20 2UR
Technical specications
10.2 Standards and approvals
Point-to-point connection CP 440 Installation and Parameter Assignment
122 Equipment Manual, 03/2022, A5E00057742-AE
To Next Page
Loading...
