More user manuals on ManualsBase.com
07.97 6 NC Machine Data (NC MD), NC Setting Data (NC SD)
6.2 General machine data (general data)
2nd MCS offset in Z coordinates (as from SW 6)
339
Default value Lower input limit Upper input limit Units
0 0 99 999 999 MS
POWER ON
Note:
For further information see description of the function collision monitoring.
3rd MCS offset in X coordinates (as from SW 6)
340
Default value Lower input limit Upper input limit Units
0 0 99 999 999 MS
POWER ON
Note:
For further information see description of the function collision monitoring.
3rd MCS offset in Y coordinates (as from SW 6)
341
Default value Lower input limit Upper input limit Units
0 0 99 999 999 MS
POWER ON
Note:
For further information see description of the function collision monitoring.
3rd MCS offset in Z coordinates (as from SW 6)
342
Default value Lower input limit Upper input limit Units
00 MS
POWER ON
Note:
For further information see description of the function collision monitoring.
4th MCS offset in X coordinates (as from SW 6)
343
Default value Lower input limit Upper input limit Units
0 0 99 999 999
POWER ON
Note:
For further information see description of the function collision monitoring.
4th MCS offset in Y coordinates (as from SW 6)
344
Default value Lower input limit Upper input limit Units
0 0 99 999 999
POWER ON
Note:
For further information see description of the function collision monitoring.
4th MCS offset in Z coordinates (as from SW 6)
345
Default value Lower input limit Upper input limit Units
0 0 99 999 999
POWER ON
Note:
For further information see description of the function collision monitoring.
©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50
6–27
SINUMERIK 840C (IA)
To Next Page
Loading...
Need help?
General
