Siemens SIMOTICS Series - Quality documents; EU Declaration of Conformity for the encoder; Quality documents for the SIMOTICS motors

SIMOTICS M-1FE2 built-in motors
Hardware Installation Manual, 04/2020, A5E50074509B AA
19
Special safety notices for handling built-in motors
2
Components with permanent magnets
The synchronous version of the 1FE2 built-in motor contains permanent magnets in the
rotor.
WARNING
Danger to life and material damage when incorrectly used
If you do not use the motors correctly, there is a risk of death, severe injury and/or material
damage.
• Only use the motors for their intended purpose.
• Make sure that the conditions at the location of use comply with all the rating plate data.
• Make sure that the conditions at the location of use comply with the conditions specified
in this documentation. When necessary, take into account deviations regarding
approvals or country-specific regulations.
WARNING
Danger to life caused by magnetic and electrical fields to persons with active implants
Electric motors represent a danger for people with active implants who come close to the
motors.
• If you are an affected person, maintain a minimum separation of 500 mm to motors.
If you wish to use special versions and design variants whose specifications vary from the
motors described in this document, then contact your local Siemens office.
If you have any questions regarding the intended usage, please contact your local Siemens
office.